diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..b97f4d5
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+local_backups/
diff --git a/backup-configs.sh b/backup-configs.sh
index a7326da..9a2ab84 100755
--- a/backup-configs.sh
+++ b/backup-configs.sh
@@ -1,33 +1,54 @@
 #!/bin/sh
 
-OUT_FILE="$1"
-LIST_FILE="$2"
-OPKG_SCR="$3"
-CONFIGS="$4"
+LOCAL_FILE="$1"
+LOCAL_LST="$2"
+SCR_OPKG="$3"
+C_LIST="$4"
 H_REPLACE="$5"
+C_EXCLUDE="$6"
 
-[ -z "$OUT_FILE" ] || [ -z "$LIST_FILE" ] || [ -z "$OPKG_SCR" ] || [ -z "$CONFIGS" ] || [ -z "H_REPLACE" ] && echo "Missing params!" && exit 1
+[ -z "$LOCAL_FILE" ] || [ -z "$LOCAL_LST" ] || [ -z "$C_LIST" ] && echo "Missing params!" && exit 1
 
 TMP_DIR="/tmp/backup_stack"
 rm -rf "$TMP_DIR" && mkdir -p "$TMP_DIR"
-COUNT=0
 
-echo "Writing package list..."
-$OPKG_SCR write "$LIST_FILE" "$H_REPLACE"
+$SCR_OPKG write "$LOCAL_LST" "$H_REPLACE"
 
-echo "Collecting files..."
-for p in $CONFIGS; do
+echo "Included:"
+for p in $C_LIST; do
+    [ -z "$p" ] && continue
     if [ -e "$p" ]; then
         mkdir -p "$TMP_DIR$(dirname "$p")"
-        cp -a "$p" "$TMP_DIR$p"
+        cp -aP "$p" "$TMP_DIR$p"
         echo " [+] $p"
-        COUNT=$((COUNT + 1))
-    else
-        echo " [-] $p (not found)"
     fi
 done
 
-echo "Creating archive..."
-tar -czf "$OUT_FILE" -C "$TMP_DIR" .
+echo "Excluded:"
+if [ -n "$C_EXCLUDE" ]; then
+    for item in $C_EXCLUDE; do
+        [ -z "$item" ] && continue
+        TARGET_REMOVE=$(echo "$TMP_DIR/$item" | sed 's|//*|/|g')
+        if [ -e "$TARGET_REMOVE" ]; then
+            rm -rf "$TARGET_REMOVE"
+            echo " [-] $item"
+        else
+            echo " [!] Not found in backup: $item"
+        fi
+    done
+fi
+
+printf "Creating backup... "
+TAR_ERR=$(tar -cz -f "$LOCAL_FILE" -C "$TMP_DIR" . 2>&1)
+
+if [ $? -eq 0 ] && [ -f "$LOCAL_FILE" ]; then
+    echo "OK"
+    echo " [+] Archive size: $(du -sh "$LOCAL_FILE" | awk '{print $1}')"
+else
+    echo "FAILED"
+    [ -n "$TAR_ERR" ] && echo "[!] Tar error: $TAR_ERR"
+    rm -rf "$TMP_DIR"
+    exit 1
+fi
+
 rm -rf "$TMP_DIR"
-echo "Total $COUNT config paths saved to $OUT_FILE."
diff --git a/backup-manager.sh b/backup-manager.sh
index cf953ae..449868b 100755
--- a/backup-manager.sh
+++ b/backup-manager.sh
@@ -1,10 +1,24 @@
 #!/bin/sh
 
+# "smb" or "nfs"
+STORAGE_TYPE="nfs"
+
+# ip or hostname
+S_HOST="nfs.lan"
+
+# /path/to/backup
+S_PATH="/mnt/media1/backup"
+
+SMB_USER="guest"
+SMB_PASS="guest"
+
+LOCAL_KEEP=10
+HOST_KEEP=30
+
 HNAME=$(uci get system.@system[0].hostname)
 DATE=$(date +%Y-%m-%d_%H-%M)
 
 S_MOUNT="/tmp/share"
-S_ADDR="nfs.lan:/mnt/media1/backup"
 
 C_LIST="
 /etc/config/
@@ -13,178 +27,201 @@ C_LIST="
 /root/.ssh/
 /opt/xray-config/
 /opt/backup-manager/
+/etc/nftables.d/10-netmap.nft
+"
+
+C_EXCLUDE="
+/opt/backup-manager/local_backups
+/etc/xray/ipset
+/etc/xray/ipnet
 "
 
 H_REPLACE="wpad dnsmasq"
 
 DIR="/opt/backup-manager"
+L_BACKUP_DIR="$DIR/local_backups"
 SCR_BACKUP="$DIR/backup-configs.sh"
 SCR_OPKG="$DIR/backup-opkg.sh"
 
-check_dependencies() {
-    echo "--- Checking NFS dependencies ---"
-    local missing=""
-    local pkgs="kmod-fs-nfs kmod-fs-nfs-v3 kmod-fs-nfs-v4 nfs-utils"
-    
-    for pkg in $pkgs; do
-        if ! opkg list-installed | grep -q "^$pkg "; then
-            missing="$missing $pkg"
-        fi
-    done
+mkdir -p "$L_BACKUP_DIR"
 
-    if [ -n "$missing" ]; then
-        echo " [!] Missing packages:$missing"
-        printf "Would you like to install them now? (y/n): "
-        read ans
-        if [ "$ans" = "y" ] || [ "$ans" = "Y" ]; then
-            echo "Updating package lists..."
-            opkg update >/dev/null 2>&1
-            for m in $missing; do
-                printf " [+] Installing $m... "
-                if opkg install "$m" >/dev/null 2>&1; then
-                    echo "OK"
-                else
-                    echo "FAILED"
-                    return 1
-                fi
-            done
-            /sbin/depmod >/dev/null 2>&1
-        else
-            echo "Error: Cannot proceed without NFS dependencies."
-            return 1
-        fi
+if [ "$STORAGE_TYPE" = "nfs" ]; then
+    FULL_ADDR="${S_HOST}:${S_PATH}"
+else
+    FULL_ADDR="//${S_HOST}${S_PATH}"
+fi
+
+check_network() {
+    printf "Checking network %s... " "$S_HOST"
+    if ! ping -c 2 "$S_HOST" >/dev/null 2>&1; then
+        echo "FAILED"
+        echo "[!] Error: Remote host $S_HOST is unreachable."
+        echo "    Check if the NAS is powered on and the IP/Hostname is correct."
+        return 1
     fi
-    echo " [+] All dependencies are satisfied."
+    echo "OK"
+    return 0
+}
+
+check_dependencies() {
+    printf "Checking %s dependencies... " "$STORAGE_TYPE"
+    local pkgs=""
+    [ "$STORAGE_TYPE" = "nfs" ] && pkgs="kmod-fs-nfs kmod-fs-nfs-v3 kmod-fs-nfs-v4 nfs-utils"
+    [ "$STORAGE_TYPE" = "smb" ] && pkgs="kmod-fs-cifs cifs-utils"
+    local missing=""
+    for pkg in $pkgs; do
+        opkg list-installed | grep -q "^$pkg " || missing="$missing $pkg"
+    done
+    if [ -n "$missing" ]; then
+        echo " [!] Missing: $missing. Install them to use remote backup."
+        return 1
+    fi
+    echo "OK"
     return 0
 }
 
 mount_share() {
     mkdir -p "$S_MOUNT"
-    mount -t nfs "$S_ADDR" "$S_MOUNT" -o nolock,tcp >/dev/null 2>&1
-    if ! grep -qs "$S_MOUNT" /proc/mounts; then
-        echo "Error: Failed to mount NFS share ($S_ADDR)"
+    if grep -qs "$S_MOUNT" /proc/mounts; then
+        umount -l "$S_MOUNT" >/dev/null 2>&1
+    fi
+    printf "Mounting %s storage... " "$STORAGE_TYPE"
+    local mount_err
+    if [ "$STORAGE_TYPE" = "nfs" ]; then
+        mount_err=$(mount -t nfs "$FULL_ADDR" "$S_MOUNT" -o nolock,tcp 2>&1)
+    else
+        mount_err=$(mount -t cifs "$FULL_ADDR" "$S_MOUNT" -o user=$SMB_USER,pass=$SMB_PASS,vers=3.0,sec=ntlmssp 2>&1)
+    fi
+    if grep -qs "$S_MOUNT" /proc/mounts; then
+        echo "OK"
+        return 0
+    else
+        echo "FAILED"
+        echo "[!] Error: Failed to mount $STORAGE_TYPE ($FULL_ADDR)"
+        [ -n "$mount_err" ] && echo "    System message: $mount_err"
         return 1
     fi
-    return 0
 }
 
-check_nfs_write() {
-    echo "--- Testing NFS Write/Read access ---"
-    mount_share || return 1
-    
-    local test_file="$S_MOUNT/.nfs_test_$(date +%s)"
-    
-    if ! touch "$test_file" >/dev/null 2>&1; then
-        echo " Error: Cannot write to NFS share (Read-only?)"
-        umount "$S_MOUNT"
-        return 1
-    fi
-    
-    if ! cat "$test_file" >/dev/null 2>&1; then
-        echo " Error: Cannot read from NFS share"
-        rm -f "$test_file"
-        umount "$S_MOUNT"
-        return 1
-    fi
-    
-    rm -f "$test_file"
-    echo " [+] NFS Write/Read test passed."
-    umount "$S_MOUNT"
-    return 0
+manage_local_backups() {
+    printf "Cleaning up local storage (keeping last %s)... " "$LOCAL_KEEP"
+    local tail_val=$((LOCAL_KEEP + 1))
+    ls -t "$L_BACKUP_DIR"/*.tar.gz 2>/dev/null | tail -n +$tail_val | xargs rm -f
+    ls -t "$L_BACKUP_DIR"/*.lst 2>/dev/null | tail -n +$tail_val | xargs rm -f
+    echo "OK"
 }
 
-clean_old_backups() {
-    mount_share || return 1
-    echo "--- Cleaning up backups older than 30 days ---"
-    
-    find "$S_MOUNT" -maxdepth 1 -type f \( -name "*.tar.gz" -o -name "*.lst" \) -mtime +30 -exec rm -f {} \;
-    
-    echo "Cleanup complete."
-    umount "$S_MOUNT"
+clean_old_remote_backups() {
+    printf "Cleaning up remote backups older than %s days... " "$HOST_KEEP"
+    find "$S_MOUNT" -maxdepth 1 -type f \( -name "*.tar.gz" -o -name "*.lst" \) -mtime +$HOST_KEEP -exec rm -f {} \;
+    echo "OK"
 }
 
-select_remote_file() {
-    local ext="$1"
-
-    check_dependencies || exit 1
-    check_nfs_write || exit 1
-    mount_share || return 1
-
-    echo "--- Select $ext file from NFS ---" >&2
-    FILES=$(find "$S_MOUNT" -maxdepth 1 -name "*$ext" | sort -r)
-    
-    if [ -z "$FILES" ]; then
-        echo "No $ext files found." >&2
-        umount "$S_MOUNT"
-        return 1
-    fi
-
+select_file() {
+    local search_dir="$1"
+    local ext="$2"
+    echo "Select $ext file" >&2
+    FILES=$(ls -t "$search_dir"/*"$ext" 2>/dev/null)
+    [ -z "$FILES" ] && return 1
     i=1
     for f in $FILES; do
-        size=$(du -sh "$f" | awk '{print $1}')
-        echo " [$i] $(basename "$f") ($size)" >&2
+        echo " [$i] $(basename "$f") ($(du -sh "$f" | awk '{print $1}'))" >&2
         i=$((i+1))
     done
-
     printf "Selection (0 to cancel): " >&2
     read choice
-    
-    if [ -z "$choice" ] || [ "$choice" -eq 0 ] || [ "$choice" -ge "$i" ]; then
-        echo "Cancelled." >&2
-        umount "$S_MOUNT"
-        return 1
-    fi
-
-    SELECTED=$(echo "$FILES" | sed -n "${choice}p")
-    
-    RET_PATH="/tmp/restore_target$ext"
-    cp "$SELECTED" "$RET_PATH"
-    
-    umount "$S_MOUNT"
-    SELECTED_PATH="$RET_PATH"
+    [ -z "$choice" ] || [ "$choice" -eq 0 ] || [ "$choice" -ge "$i" ] && return 1
+    SELECTED_PATH=$(echo "$FILES" | sed -n "${choice}p")
 }
 
 case "$1" in
     backup)
-        echo "--- Remote Backup Starting ---"
-
-        check_dependencies || exit 1
-        check_nfs_write || exit 1
-        mount_share || exit 1
-        
-        REMOTE_BACKUP="$S_MOUNT/backup_${HNAME}_${DATE}.tar.gz"
-        REMOTE_LIST="$S_MOUNT/packages_${HNAME}_${DATE}.lst"
-        
-        $SCR_BACKUP "$REMOTE_BACKUP" "$REMOTE_LIST" "$SCR_OPKG" "$C_LIST" "$H_REPLACE"
-        
-        sync
-        umount "$S_MOUNT"
-        echo "--- Backup Successfully Saved to NFS ---"
-
-        clean_old_backups
+        LOCAL_FILE="$L_BACKUP_DIR/backup_${HNAME}_${DATE}.tar.gz"
+        LOCAL_LST="$L_BACKUP_DIR/packages_${HNAME}_${DATE}.lst"
+        REMOTE_STATUS="FAILED"
+        $SCR_BACKUP "$LOCAL_FILE" "$LOCAL_LST" "$SCR_OPKG" "$C_LIST" "$H_REPLACE" "$C_EXCLUDE"
+        manage_local_backups
+        if check_network && check_dependencies && mount_share; then
+            printf "Copying to %s storage... " "$STORAGE_TYPE"
+            if cp "$LOCAL_FILE" "$LOCAL_LST" "$S_MOUNT/"; then
+                echo "OK"
+                REMOTE_STATUS="OK"
+                clean_old_remote_backups
+            else
+                echo "FAILED"
+            fi
+            sync
+            umount "$S_MOUNT"
+        else
+            echo "    Backup remains only in $L_BACKUP_DIR"
+        fi
+        echo "Summary:"
+        echo " [+] Local: $LOCAL_FILE"
+        if [ "$REMOTE_STATUS" = "OK" ]; then
+            echo " [+] Remote: ${S_HOST}:${S_PATH}/$(basename "$LOCAL_FILE")"
+        else
+            echo " [!] Remote: Not saved"
+        fi
         ;;
 
     restore-pkgs)
-        SELECTED_PATH=""
-        select_remote_file ".lst"
-        if [ -n "$SELECTED_PATH" ] && [ -f "$SELECTED_PATH" ]; then
-            echo "Restoring packages from $SELECTED_PATH..."
-            $SCR_OPKG restore "$SELECTED_PATH" "$H_REPLACE"
-            rm "$SELECTED_PATH"
-        fi
+        check_network && mount_share || { echo "Remote unavailable"; exit 1; }
+        select_file "$S_MOUNT" ".lst"
+        [ -n "$SELECTED_PATH" ] && $SCR_OPKG restore "$SELECTED_PATH" "$H_REPLACE"
+        umount "$S_MOUNT"
         ;;
 
-    restore-sys)
-        SELECTED_PATH=""
-        select_remote_file ".tar.gz"
-        if [ -n "$SELECTED_PATH" ] && [ -f "$SELECTED_PATH" ]; then
-            echo "Restoring system from $SELECTED_PATH..."
-            sysupgrade -r "$SELECTED_PATH"
-            echo "Restore complete. Reboot is recommended."
-        fi
+    restore-sys-net)
+        check_network && mount_share || { echo "Remote unavailable"; exit 1; }
+        select_file "$S_MOUNT" ".tar.gz"
+        [ -n "$SELECTED_PATH" ] && sysupgrade -r "$SELECTED_PATH"
+        umount "$S_MOUNT"
         ;;
+
+    restore-sys-local)
+        select_file "$L_BACKUP_DIR" ".tar.gz"
+        [ -n "$SELECTED_PATH" ] && sysupgrade -r "$SELECTED_PATH"
+        ;;
+
+    restore)
+        echo "1. Local storage ($L_BACKUP_DIR)"
+        echo "2. Remote storage ($STORAGE_TYPE)"
+        printf "Select source: "
+        read s_choice
+        R_DIR=""
+        [ "$s_choice" -eq 1 ] && R_DIR="$L_BACKUP_DIR"
+        [ "$s_choice" -eq 2 ] && { check_network && mount_share && R_DIR="$S_MOUNT"; }
+        if [ -z "$R_DIR" ]; then
+            echo " [!] Source unavailable or cancelled."
+            exit 1
+        fi
+        echo "1. System configs (.tar.gz)"
+        echo "2. Package list (.lst)"
+        printf "Select type: "
+        read t_choice
+        case "$t_choice" in
+            1)
+                select_file "$R_DIR" ".tar.gz"
+                if [ -n "$SELECTED_PATH" ]; then
+                    [ "$s_choice" -eq 2 ] && { cp "$SELECTED_PATH" /tmp/restore.tar.gz; SELECTED_PATH="/tmp/restore.tar.gz"; umount "$S_MOUNT"; }
+                    sysupgrade -r "$SELECTED_PATH"
+                fi
+                ;;
+            2)
+                select_file "$R_DIR" ".lst"
+                if [ -n "$SELECTED_PATH" ]; then
+                    $SCR_OPKG restore "$SELECTED_PATH" "$H_REPLACE"
+                fi
+                ;;
+            *)
+                echo "Cancelled."
+                ;;
+        esac
+        grep -qs "$S_MOUNT" /proc/mounts && umount "$S_MOUNT"
+        ;;
+
     *)
-        echo "Usage: $0 {backup|restore-pkgs|restore-sys}"
+        echo "Usage: $0 {backup|restore}"
         exit 1
         ;;
 esac
diff --git a/backup-opkg.sh b/backup-opkg.sh
index 8d70faa..5e8e5b5 100755
--- a/backup-opkg.sh
+++ b/backup-opkg.sh
@@ -1,21 +1,21 @@
 #!/bin/sh
 
 CMD="$1"
-PKG_FILE="$2"
-HOT_REPLACE="$3"
+LOCAL_LST="$2"
+H_REPLACE="$3"
 
-[ -z "$CMD" ] || [ -z "$PKG_FILE" ] || [ -z "$HOT_REPLACE" ] && echo "Missing params!" && exit 1
+[ -z "$CMD" ] || [ -z "$LOCAL_LST" ] || [ -z "$H_REPLACE" ] && echo "Missing params!" && exit 1
 
 TMP_DIR="/tmp/opkg_restore"
 
 fix_dns() {
     local dns1="1.1.1.1"
     local dns2="1.0.0.1"
-
     if ! grep -q "$dns1" /etc/resolv.conf; then
-        echo " [+] Patching DNS for restore..."
+        printf "Patching DNS for restore... "
         sed -i "1i nameserver $dns1" /etc/resolv.conf
         sed -i "2i nameserver $dns2" /etc/resolv.conf
+        echo "OK"
     fi
 }
 
@@ -28,7 +28,6 @@ BEGIN {
         FLASH_TIME = substr(line, 17)
     }
     close(cmd)
-    
     while ((getline < status_file) > 0) {
         if ($1 == "Package:") { pkg = $2 }
         if ($1 == "Installed-Time:") {
@@ -47,42 +46,39 @@ EOF
 
 case "$CMD" in
     write)
-        mkdir -p "$(dirname "$PKG_FILE")"
-        echo "Scanning for user-installed packages..."
-        
-        > "$PKG_FILE"
-        
+        mkdir -p "$(dirname "$LOCAL_LST")"
+        echo "Package list:"
+        > "$LOCAL_LST"
         for pkg in $(list_user_packages); do
-            echo "$pkg" >> "$PKG_FILE"
+            echo "$pkg" >> "$LOCAL_LST"
             echo " [+] $pkg"
         done
-        
-        echo "Total $(wc -l < "$PKG_FILE") packages saved to $PKG_FILE"
         ;;
+
     restore)
-        [ ! -f "$PKG_FILE" ] && echo "File not found!" && exit 1
+        [ ! -f "$LOCAL_LST" ] && echo "File not found!" && exit 1
 
         [ ! -f /etc/resolv.conf-backup ] && cp /etc/resolv.conf /etc/resolv.conf-backup
         fix_dns
-
-        echo "Updating package lists..."
+        printf "Updating package lists... "
         opkg update >/dev/null 2>&1
-
-        echo "Phase 1: Removing conflicts ($HOT_REPLACE)..."
-        if [ -n "$HOT_REPLACE" ]; then
-            REMOVABLE=$(opkg list-installed | grep -E $(echo "$HOT_REPLACE" | tr ' ' '|') | awk '{print $1}')
+        echo "OK"
+        echo "Removing conflicts:"
+        if [ -n "$H_REPLACE" ]; then
+            REMOVABLE=$(opkg list-installed | grep -E $(echo "$H_REPLACE" | tr ' ' '|') | awk '{print $1}')
             for p in $REMOVABLE; do 
+                printf " [-] %s... " "$p"
                 opkg remove "$p" --force-depends >/dev/null 2>&1
+                echo "OK"
             done
         fi
-
-        echo "Phase 2: Installing packages from list..."
-        for pkg in $(cat "$PKG_FILE"); do
+        echo "Installing packages:"
+        for pkg in $(cat "$LOCAL_LST"); do
             if opkg list-installed | grep -q "^$pkg "; then
-                echo " [s] $pkg is already installed"
+                echo " [s] $pkg... is already installed"
             else
                 fix_dns
-                printf " [+] Installing $pkg... "
+                printf " [+] $pkg... "
                 if opkg install "$pkg" >/dev/null 2>&1; then
                     echo "OK"
                 else
@@ -90,8 +86,9 @@ case "$CMD" in
                 fi
             fi
         done
-
         [ -f /etc/resolv.conf-backup ] && mv /etc/resolv.conf-backup /etc/resolv.conf
-        echo "Restore complete. Reboot is recommended."
+        echo "Summary:"
+        echo "  Restore complete."
+        echo "  Reboot is recommended."
         ;;
 esac